The right accessories can make a campervan or motorhome more practical, secure and comfortable without requiring a complete conversion.

WeConvert installs awnings and selected exterior and interior accessories from our private workshop in Blackburn.

Whether you need a wind-out awning, reversing camera, additional security, bike rack, exterior lighting or another practical upgrade, we can assess the vehicle and recommend a suitable installation.

We work on campervans, motorhomes, self-build conversions and suitable commercial vans for customers across Blackburn, Darwen, Accrington, Burnley, Rossendale, Bolton, Chorley, Preston and the wider Lancashire and North West area.

Campervan and Motorhome Accessory Installation

Our accessory-fitting service can include:

• Wind-out awnings
• Awning rails
• Reversing cameras
• Parking cameras
• Vehicle security systems
• Additional locks
• Exterior lighting
• Entry steps
• Bike racks
• Roof bars and selected roof accessories
• Grab handles
• External shower points
• Mains hook-up inlets
• Water fillers
• Ventilation accessories
• USB and charging outlets
• Interior lighting upgrades
• Storage accessories
• Replacement exterior fittings

Accessories can be installed as standalone jobs or combined into a larger upgrade package.

Where the work affects electrical, water, gas or interior systems, we can coordinate the installation with the relevant WeConvert service.

Campervan Awning Installation

A wind-out awning can create useful sheltered space beside a campervan or motorhome.

It may provide:

• Shade during warmer weather
• Protection from light rain
• Covered space beside the sliding door
• Shelter for outdoor cooking or seating
• A more usable pitch during longer stays
• Optional attachment points for privacy panels or awning rooms

We can fit suitable campervan and motorhome awnings from established leisure-vehicle manufacturers, subject to vehicle compatibility and product availability.

The installation may include:

• Awning unit
• Vehicle-specific brackets
• Roof or side mounting
• Mechanical fixing
• Suitable sealing
• Interior access where required
• Electrical connection for powered models
• External lighting connection
• Initial operation checks

The vehicle must be assessed before the mounting method and bracket arrangement can be confirmed.

Wind-Out Awnings

Wind-out awnings are commonly mounted to the side or roof edge of a campervan or motorhome.

Depending on the product, operation may be:

• Manual
• Crank-operated
• Powered
• Controlled by a wall switch
• Controlled remotely
• Integrated with wind sensors

The right awning depends on:

• Vehicle make and model
• Roof shape
• Roof height
• Sliding-door clearance
• Existing roof rails
• Pop-top installation
• Overall vehicle length
• Available mounting brackets
• Intended awning length
• Vehicle body construction

A longer awning is not automatically the best option.

The mounting points, sliding door, roof profile and weight distribution all need to be considered before the product is ordered.

Awning Rails

An awning rail can be used to attach a drive-away awning, sun canopy or suitable fabric accessory.

Rails may be mounted:

• Along the side of a panel van
• Above the sliding door
• To compatible roof rails
• Using a vehicle-specific mounting system
• As part of another awning installation

Before fitting a rail, we assess:

• Vehicle roof profile
• Sliding-door operation
• Existing trim
• Pop-top clearance
• Drainage routes
• Rail length
• Internal access
• Required sealant and fixings

The rail and attached awning must be suitable for the vehicle and intended use.

We do not recommend relying on temporary domestic fixings for equipment exposed to wind and weather.

Pop-Top and Roof Considerations

Awnings and roof accessories must be planned carefully where a vehicle has:

• A pop-top roof
• Roof rails
• Solar panels
• Rooflights
• Powered roof fans
• Satellite equipment
• Roof-mounted air conditioning
• Existing awning brackets

An awning must not obstruct the pop-top, damage the roof structure or interfere with existing equipment.

Where a vehicle already has several roof-mounted systems, we may need to inspect the available fixing positions before recommending a product.

In some cases, the safest option may involve a shorter awning or a different bracket system.

Reversing Camera Installation

A reversing camera can improve visibility behind a campervan or motorhome, particularly where the vehicle has limited rear windows or a long rear overhang.

We can install suitable systems including:

• Rear reversing cameras
• High-level cameras
• Number-plate cameras
• Twin-lens camera systems
• Constant rear-view cameras
• Dashboard monitors
• Replacement rear-view mirror monitors
• Integration with compatible head units
• Wired systems
• Selected wireless systems

The best option depends on the vehicle and the type of visibility required.

A camera intended only for reversing may activate with reverse gear. A constant-view system can provide a continuous rear image while driving where the product is designed for that use.

Reversing Camera Positioning

Camera position affects the usable view.

Possible locations include:

• High above the rear doors
• Near the number plate
• Within a brake-light housing
• On a rear body panel
• Beneath an existing rear accessory
• On a motorhome rear wall

We consider:

• Vehicle height
• Rear-door opening
• Bike racks
• Spare wheels
• Number-plate position
• Existing wiring routes
• Desired viewing angle
• Protection from damage
• Access for future repair

Campervans and motorhomes often benefit from a higher camera position because it gives a clearer view of the area immediately behind the vehicle.

Campervan and Motorhome Security Upgrades

Campervans frequently contain valuable electrical equipment, tools and personal possessions.

We can install selected security upgrades such as:

• Additional door locks
• Deadlocks
• Slamlocks for suitable commercial applications
• Internal door-security devices
• Window-security accessories
• Alarm upgrades
• Tracking equipment
• Immobilisation accessories
• Security lighting
• Lockable storage
• External equipment locks
• Visible deterrents

The right security setup depends on:

• Vehicle type
• Existing factory security
• Campervan or commercial use
• Doors requiring protection
• Value of equipment carried
• Insurance requirements
• Customer preference
• Whether the vehicle is regularly left unattended

No single device makes a vehicle impossible to steal or enter.

A layered system combining physical security, electronic protection and sensible storage is usually more effective than relying on one product.

Trackers and Alarm Equipment

We may be able to fit suitable vehicle trackers and alarm accessories where the product and installation fall within our scope.

Possible options include:

• Subscription trackers
• GPS location devices
• Battery-backed trackers
• Alarm-triggered trackers
• Door and movement sensors
• Additional sirens
• Visible alarm indicators

Some insurance-approved products must be installed by a manufacturer-authorised or Thatcham-recognised installer.

Where formal certification or approved installation is required, we will confirm whether the work needs to be referred to a specialist.

We will not describe an installation as insurance approved unless the product, installer and documentation meet the insurer’s requirements.

Campervan Bike Rack Installation

A bike rack can be fitted to suitable campervans and motorhomes, depending on vehicle construction and the number and weight of the bikes.

Possible systems include:

• Rear-door bike racks
• Tailgate bike racks
• Motorhome wall-mounted racks
• Chassis-mounted systems
• Towbar-mounted bike racks
• Electric-bike-capable racks

Before recommending a rack, we consider:

• Vehicle make and model
• Door or tailgate construction
• Number of bikes
• Bike weight
• Electric-bike weight
• Rear-door operation
• Number-plate visibility
• Rear lights
• Camera position
• Maximum permitted rack load
• Rear axle loading
• Overall vehicle length

Electric bikes can be significantly heavier than standard bicycles.

The rack and vehicle mounting arrangement must be specifically suitable for the total carried weight.

Towbar and chassis work may require a separate specialist where the relevant mounting equipment is not already installed.

Motorhome Bike Racks

Coachbuilt motorhomes may use wall-mounted bike racks fixed through the rear body.

These installations must account for:

• Internal strengthening
• Wall construction
• Existing furniture
• Water-ingress prevention
• Mounting height
• Maximum rack capacity
• Rear axle loading
• Access to rear lockers
• Number plate and lighting

The internal wall structure is not always visible before work begins.

We may need to assess the motorhome construction or obtain manufacturer information before confirming that a wall-mounted rack can be fitted.

Exterior Lighting

We can install suitable exterior lighting for campervans and motorhomes.

This may include:

• Awning lights
• Door-entry lights
• Work lights
• Rear utility lights
• Low-level step lights
• Storage-area lights
• Scene lighting
• Exterior LED strips

The installation may require:

• Suitable weather-resistant light fitting
• Protected cable route
• Interior switch
• Fuse protection
• Connection to the leisure battery
• Relay or controller
• Integration with an awning system

Exterior lighting should be positioned so it is useful without creating unnecessary glare for neighbouring pitches or other road users.

Lighting intended for campsite or stationary use should not be confused with legal vehicle road lighting.

Electric and Manual Entry Steps

An entry step can make access easier, particularly on higher-roof vans and motorhomes.

Depending on the vehicle, options may include:

• Fixed exterior steps
• Manual pull-out steps
• Electric retractable steps
• Replacement step mechanisms
• Step warning systems
• Step lighting

An electric step may require:

• Secure chassis or body mounting
• 12V electrical supply
• Suitable fuse protection
• Operating switch
• Ignition warning or automatic retraction
• Protection from road debris
• Adequate ground clearance

The underside of the vehicle must be inspected before confirming that a step installation is practical.

Roof Bars and Selected Roof Accessories

We can consider fitting suitable roof bars and selected roof-mounted accessories to compatible vehicles.

This may include:

• Roof bars
• Load rails
• Lightweight storage accessories
• Ladder mounting points
• Selected sports-equipment carriers
• Solar-panel mounting arrangements
• Roof-access accessories

Before accepting roof work, we consider:

• Manufacturer roof-load limits
• Pop-top construction
• Existing rooflights
• Solar panels
• Awning brackets
• Vehicle height
• Equipment weight
• Dynamic and static loading
• Safe access
• Intended use

A campervan roof should not be overloaded or drilled without understanding the roof structure and load limitations.

Heavy roof decks, lifting equipment or custom roof structures may require specialist design outside our normal accessory-fitting scope.

Interior Accessories and Convenience Upgrades

We can also install selected interior accessories such as:

• Additional USB sockets
• USB-C charging points
• 12V sockets
• Reading lights
• Storage nets
• Grab handles
• Table mounts
• Cup holders
• Curtain rails
• Thermal screen accessories
• Control-panel mounts
• Device holders
• Lockable storage fittings

These smaller upgrades can often be combined into one workshop booking.

Where electrical accessories are installed, the existing battery system and circuit protection must be suitable for the additional load.

Exterior Water and Electrical Accessories

Selected exterior service points can also be installed, including:

• External shower points
• Water fillers
• Mains hook-up inlets
• External 12V outlets
• External aerial points
• Suitable utility connections

Cutting a new exterior aperture requires careful planning around:

• Internal furniture
• Existing wiring
• Water pipework
• Gas equipment
• Vehicle ribs
• Door movement
• Weather sealing
• Future access

Where an installation affects the water or electrical system, we assess the complete connection rather than only fitting the exterior housing.

Replacement Exterior Fittings

We can replace selected damaged or worn exterior accessories, including:

• Hook-up inlets
• Water fillers
• External shower housings
• Awning lights
• Vent covers
• Access doors
• Exterior handles
• Camera housings
• Selected awning components
• Damaged trims and covers

A replacement may not always match the existing aperture.

The surrounding panel, sealant and internal access must be inspected before the full scope can be confirmed.

Where water ingress or corrosion is found, additional preparation or repair may be needed.

Customer-Supplied Accessories

We may install customer-supplied accessories where the product is suitable, complete and compatible with the vehicle.

Before accepting the work, we consider:

• Manufacturer and model
• Vehicle compatibility
• Maximum load
• Product condition
• Installation instructions
• Included brackets
• Included wiring
• Required adaptors
• Warranty arrangements
• Availability of replacement parts

We may decline:

• Used products of uncertain condition
• Incomplete kits
• Products without suitable instructions
• Accessories exceeding vehicle limits
• Poor-quality electrical products
• Equipment not intended for vehicle use
• Products that cannot be mounted safely

Where the accessory was not supplied by WeConvert, the product warranty remains with the customer and original supplier.

Our Installation Process

1. Initial enquiry

Tell us about the vehicle and the accessory you want installed.

Include the product make and model where it has already been purchased.

2. Vehicle assessment

We inspect the proposed mounting area, internal access, structure and any nearby electrical, water or gas systems.

3. Product and position confirmation

We confirm whether the accessory is suitable and agree the installation position.

Where alternatives are available, we explain the practical differences.

4. Written quotation

Your quotation will explain:

• Product being supplied
• Installation labour
• Brackets or adaptors
• Electrical or plumbing work
• Interior access and finishing
• Known assumptions and exclusions

5. Installation

The accessory is fitted using an appropriate mounting, sealing and connection method.

Where electrical or water services are involved, these are installed and protected as part of the agreed scope.

6. Testing and handover

Moving, electrical or powered accessories are tested where applicable.

We explain normal operation, weight limits, routine checks and any maintenance requirements.

Why Choose WeConvert?

Campervan-focused installation

We understand how accessories interact with furniture, electrical systems, water systems, roof equipment and vehicle structure.

Standalone upgrades

You do not need to book a complete conversion. We can undertake suitable individual installations.

Multiple accessories in one booking

Several smaller upgrades can be combined into a single workshop visit.

New and existing vehicles

We can consider panel-van conversions, factory-built campervans, suitable motorhomes and self-build projects.

Clear scope

We assess the product and vehicle before cutting, drilling or committing to the installation.

Local workshop service

Our Darwen workshop serves customers across Blackburn, Accrington, Burnley, Rossendale, Bolton, Chorley, Preston and wider Lancashire.

Frequently Asked Questions

Can you fit a wind-out awning to my campervan?

Yes, where a suitable awning and mounting system are available for the vehicle.

We need the vehicle make, model, roof type and preferred awning size before confirming compatibility.

Can you fit an awning to a van with a pop-top?

Potentially. The awning, brackets and pop-top movement must be assessed together.

Can you install a reversing camera?

Yes. We can install suitable wired camera and monitor systems, including selected head-unit integrations.

Can you fit a motorhome bike rack?

Potentially. The body construction, rack capacity, internal strengthening and bike weight must be assessed first.

Can you install security locks?

Yes. We can consider suitable additional locks and selected security products for campervans and commercial vans.

Can you fit accessories that I have already purchased?

Potentially, provided the product is complete, compatible and suitable for the vehicle.

Do you install electric steps?

Yes, where the underside provides suitable mounting space and ground clearance.

Can several accessories be fitted at once?

Yes. Combining smaller installations into one workshop booking can reduce repeated vehicle assessment and access work.

Do you fit roof bars?

We can fit suitable roof bars and selected roof accessories where the product and vehicle roof are compatible.

How long does accessory fitting take?

A small accessory may take a few hours.

A powered awning, reversing-camera system or installation requiring interior access may take one or more workshop days.

Request an Awning or Accessory Quote

To help us assess the work, please provide:

• Vehicle make, model and year
• Campervan or motorhome type
• Wheelbase and roof height
• Accessory required
• Product make and model, if already purchased
• Preferred installation position
• Existing roof, awning or rear-door equipment
• Weight of bikes or equipment where relevant
• Photographs of the interior and exterior
• Your postcode
• Preferred timeframe
• Approximate budget

Whether you need a wind-out awning, reversing camera, security upgrade, bike rack or a package of practical accessories, WeConvert can assess the vehicle and recommend a suitable installation.